您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/T 14598.5-1993 电气继电器 第十五部分:电气继电器触点的寿命试验 试验设备的特性规范

时间:2024-05-20 05:58:07 来源: 标准资料网 作者:标准资料网 阅读:9764
下载地址: 点击此处下载
基本信息
标准名称:电气继电器 第十五部分:电气继电器触点的寿命试验 试验设备的特性规范
英文名称:Electrical relays-Part 15: Endurance tests for electrical relay contacts-Specification for the characteristics of test equipment
中标分类: 电子元器件与信息技术 >> 电子元件 >> 继电器、斩波器
ICS分类: 电气工程 >> 电工器件 >> 继电器
替代情况:SJ/Z 9073.3-1987
发布部门:国家技术监督局
发布日期:1993-09-05
实施日期:1994-04-01
首发日期:1993-09-05
作废日期:1900-01-01
主管部门:信息产业部(电子)
归口单位:全国有或无电气继电器标准化技术委员会
起草单位:机电部电子标准化所
出版社:中国标准出版社
出版日期:2004-08-21
页数:平装16开, 页数:6, 字数:8千字
书号:155066.1-10451
适用范围

本标准规定了电气继电器触点寿命试验设备的主要特性。本标准适用于电气继电器系列标准所规定的电气继电器触点寿命试验设备。

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 电子元器件与信息技术 电子元件 继电器 斩波器 电气工程 电工器件 继电器
Product Code:SAE AMS5355
Title:Steel, Corrosion Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion resistant steel in the form of investment castings.These castings have been used typically for parts requiring good corrosion resistance and strength up to 600 掳F (316 掳C), but usage is not limited to such applications (See 8.3).Certain processing procedures and service conditions may cause these castings to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Where stress-corrosion is considered to be a factor, precipitation heat treatment should be performed at a temperature not lower than 1000 掳F (538 掳C).【英文标准名称】:Metersforcoldwaterandhotwater--Part2:Measuringinstrumentsusedintransactionorcertification
【原文标准名称】:冷水和热水用仪表.第2部分:交易或认证用测量仪表
【标准号】:JISB8570-2-2007
【标准状态】:作废
【国别】:日本
【发布日期】:2007-09-20
【实施或试行日期】:
【发布单位】:日本工业标准调查会(JP-JISC)
【起草单位】:TechnicalCommitteeonTestingandMeasurementTechnology
【标准类型】:()
【标准水平】:()
【中文主题词】:
【英文主题词】:
【摘要】:この規格は,日本国内で取引又は証明に使用する水道メーター及び温水メーターであって,少なくとも1MPaの最大許容使用圧力に耐え得る,管路内を流れる30℃以下の冷水の体積を測定する水道メーター及び管路内を流れる清浄な90℃以下の温水の体積を測定する温水メーター(以下,この規格で両者に共通する規定にあっては単に“メーター”という。)について規定する。
【中国标准分类号】:Q81
【国际标准分类号】:91_140_60
【页数】:50P;A4
【正文语种】:日语