您的位置: 标准下载 » 国内标准 » GB 国标 »

GB/T 22717-2008 电机磁极线圈及磁场绕组匝间绝缘试验规范

时间:2024-05-27 20:21:30 来源: 标准资料网 作者:标准资料网 阅读:8296
下载地址: 点击此处下载
基本信息
标准名称:电机磁极线圈及磁场绕组匝间绝缘试验规范
英文名称:Test specifications of interturn insulation of field pole coil and field winding for electrical machines
中标分类: 电工 >> 旋转电机 >> 旋转电机综合
ICS分类: 电气工程 >> 旋转电机 >> 旋转电机综合
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2008-12-30
实施日期:2009-10-01
首发日期:2008-12-30
作废日期:
主管部门:中国电器工业协会
提出单位:中国电器工业协会
归口单位:全国旋转电机标准化技术委员会(SAC/TC 26)
起草单位:上海电器科学研究所集团有限公司、上海电科电机科技有限公司、浙江金龙电机股份有限公司等
起草人:张生德、戎伟康、李锦梁、张妃、刘权、叶叶、徐伟宏、徐保弟、吴亚旗、于龙英、方建国
出版社:中国标准出版社
出版日期:2009-10-01
页数:6页
计划单号:20076975-T-604
适用范围

本标准规定了电机磁极线圈及磁场绕组的匝间绝缘试验方法及试验限值。
本标准适用于直流电机、同步电机磁极线圈及磁场绕组的匝间绝缘耐电压试验。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T1029—2005 三相同步电机试验方法

所属分类: 电工 旋转电机 旋转电机综合 电气工程 旋转电机 旋转电机综合
Product Code:SAE AMS5520
Title:Steel, Corrosion and Heat-Resistant, Sheet, Strip, Foil, and Plate, 15Cr - 7.1Ni - 2.5Mo - 1.1Al, Solution Heat Treated, Precipitation Hardenable
Issuing Committee:Ams F Corrosion Heat Resistant Alloys Committee
Scope:This specification covers a corrosion and heat-resistant steel in the form of sheet, strip, foil, and plate.These products have been used typically for parts requiring corrosion resistance and high strength up to 600 °F (316 °C) and where such parts may require welding during fabrication, but usage is not limited to such applications.Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions.Product Code:SAE AMS3644
Title:Plastic: Polyimide, for Molded Rod, Bar, and Tube, Plaque, and Formed Parts
Issuing Committee:Ams P Polymeric Materials Committee
Scope:This specification covers a polyimide plastic in the form of isostatically molded rod, bar, and tube, unidirectionally molded plaque, and direct formed parts.